Site Based – Aboelwafa

HSE SUPERVISOR

Ensure that all the Company’s Safety, Environmental and Occupational Health activities are aligned with the company’s rules and standards and ensure a safe, healthy, and incident free environment for employees and passengers of Egypt division.

Responsibilities/Duties

Cooperate with the internal resources to achieve HSE objectives.
Support the Site HSE Manager to perform HSE Risk Assessment and to define appropriate measures to control risks.
Support the HSE Site Manager to prepare, implement and maintain emergency plans.
Assist Site HSE Manager to coordinate and control activities with respect of HSE, especially where interfaces are involved with other contractors.
Provide support and advice to site personnel to prevent injury, damage to plant and equipment, fire, environmental pollution.
Recognize the best practices and the good performance. React to violations to regulations and RATP Dev Standards.
Advise other Site personnel on all aspects of HSE applicable to site activities.
Support the Site HSE Manager to develop, deploy and maintain the local procedures and tools and make sure they are aligned with RATP Dev Standards and international standards (ISO 14001 and ISO 45001).
Support the Site HSE Manager to ensure that RATP Dev HSE standards and tools (Safe Tracker ) are deployed at Site level.
Assist the Site HSE Manager to ensure compliance of the site activities according to the HSE Plan, guidelines, and work instructions.
Perform HSE legal compliance checks for specific requirements.
Inform, instruct, and train employees to carry out the work in safe & environment-friendly mode according to the method of statement.
Participate in the implementation of the site HSE training programs by providing HSE inductions and ensuring Toolbox meetings are organized.
Support manager to carry out 5’ safety briefing and 15’ safety discussion.
Promote a positive Safety culture within the workplace and attend any Safety related meetings/briefings as required within the Job role.
Comply with the requirements of the Company Safety Policy and Safety Management System.
Ensure that all accidents and ‘near misses ‘are properly recorded, reported, and investigated to determine the root causes.
Submission of Hazard observations in accordance with Hazard observation reporting guidelines.
Ensure that all potential risks that may come from performed activities are identified and mitigated and ensure that employees, contractors, and visitor are aware of safety procedures and any relevant legislation.
Consider the safety of other persons who may be affected by their acts.
Be mindful that Safety, Security and Environmental is everyone’s responsibility and as such staff members are accountable for reporting and intervening in Safety, Security and Environmental violations.
Ensure a safe workplace environment without risk to health and environment.
Ensure the Company meets its statutory obligations in all areas pertaining to health, safety, environment, and welfare at work, including statutory training and reporting.
Co-ordinate the development of health, safety & environment policies, systems of work and procedures.
Ensure that all Health, Safety & Environment policies, procedures, rules, and regulations are adhered to and are regularly reviewed, updated, and communicated.
Assist in compliance reviews, general risk assessments and other safety assessments to support Health, Safety and Environmental management.
Other duties and responsibilities might be assigned.

Electrical Engineer

Job Description:

We are looking for an Electrical Engineer (Revit) to join our team.

The ideal candidate will have a strong understanding of electrical engineering principles and be proficient in using Revit.

The successful candidate will be responsible for the following:

• Preparing, submitting, and following up on shop drawings, QS, and as-built drawings

• Following up on material submittals

• Preparing subcontractors’ and client’s invoices based on the progress report sent by the site engineer

• Preparing and following up on Variation Orders

• Ensure that electrical designs are accurate and meet project requirements

• Prepare shop drawings and other documentation

• Assist with the bidding process

• Monitor construction progress and make necessary changes to the design

• Prepare as-built drawings

##Qualifications:

• Bachelor’s degree in Electrical Engineering

• 3-10 years of experience in the electrical engineering field

• Proficiency in Microsoft Office (Excel, Outlook, Word, and Power Point)

• Excellent command of Arabic and English language skills

• AutoCAD experience is a must

• Revit experience is a must

Benefits:

• Competitive salary and benefits package

• Opportunity to work on challenging and interesting projects

• Chance to collaborate with a team of experienced engineers

• Opportunity to learn and grow in your career

• Medical Insurance

• Accommodation

• Transportation

QC Engineer

Key Responsibilities:

Prepare Quality Standard Operating Procedures (SOPs).
Review and study thoroughly project specifications, project drawings, and quality-related contract requirements.
Prepare submit and amend as needed the project quality plan and acquire approval of the engineer at the beginning of each project.
Prepare submit and amend as needed Inspection Test Plans (ITPs) and acquire approval of the engineer at the beginning of each project.
Perform quality control and quality assurance management to achieve quality requirements and required KPIs
Attend to all material inspection requests (IR), by performing inspections on materials with consultants to ensure its compliance with standards.
Report, monthly, to the management a summary quality control report of all the quality activities performed in terms of non-conformance reports statuses (NCR), material inspection requests (MIR), internal and external inspection requests (IR), etc.
manage the quality logs updating on regular basis with all quality activities and status to facilitate communication with management and other involved parties.
Maintain quality objectives and the effectiveness of the quality management system on the project.
Act as an interface with the clients and consultants in all issues related to Quality.
Plan and undertake subcontractor audits and reviews of subcontractor quality

Education and Experience:• Bachelor’s degree in Engineering Field.• Minimum 5 years of experience.

• Must have experience in Construction field

• Very good command of both written and spoken English language.

Key Skills and Pre-requisites:

• Proficient in MS office.

• Strong critical thinking skills, problem solving, negotiation and analytical skills.

• Strong written and verbal communication skills, excellent business and technical writing.

• Experience in working with multiple discipline projects.

• Ability to work across cultural and organizational boundaries and deliver under pressure

HSE Manager

Job Description
Monitor Workplace Health and Safety.
Overall responsibility and compliance with the Company’s H&S, making sure staff are aware of the importance of Health and Safety protocol.
Develop and execute health and safety plans in the workplace according to legal guidelines and standards.
Conduct all “risk assessments” as required by legislation.
Conduct health and safety inspections and prepare reports and documents as required.
Prepare and enforce policies.
Evaluate practices, procedures and facilities to assess risk and adherence to the law.
Monitor employee conformity to safety laws and policies.
Inspect equipment and machinery to observe possible unsafe conditions.
Recommend solutions to issues, improvement opportunities or new prevention measures.
Developing health and safety management systems including quality assurance systems and compliance with external audits.
Managing and coordinating audits, including liaising with external contractors.
Train employees and workers on existing and new policies to enforce a culture of health and safety.
Conduct training and presentations for health and safety matters and accident prevention.
Encourage Best Health and Safety Practices
Implement practical and effective methods, both preventative and remedial, of promoting health and safety and safe working practices in the workplace.
Supporting and developing the health, safety environmental strategy.
Developing internal and external networks to allow performance to be bench-marked.
Reducing the number of health and safety incidents to a minimum.
Job Requirements
- B.S degree Preferred ( Engineering or Science ).
- 10-15 years of experience and at least 3 years as HSE Manager in constrictions field as NEBOSH International Diploma for Occupational Health and Safety Management Professionals is preferred.
- Has IOSH and OSHA certificate is must..
- Excellent in using Microsoft office.

Mechanical Engineer

Key Responsibilities

Responsibilities will include (but not be limited to) the following:

Study the project documents, drawings, specifications and bill of quantities to coordinate the technical aspects of the project and support the Technical office manager in all technical and commercial issues to the benefit of the organization.
Preparing and follow up technical and material submittals till obtaining approvals from the Engineering consultant.
Prepare engineering calculations, designs and value engineering proposals and follow up with the Engineering consultant till obtaining approvals.
Prepare workshop drawings, technical proposals, and construction method statements with construction personnel and till obtaining approvals from the Engineering consultant.
Prepare and issue request for information and follow up the feedback of the Engineering consultants.
Prepare quantity survey reports and material takeoff and coordinate with the procurement team the delivery of relative items in a timely proper manner.
Support the Technical office manager to prepare the interim payment certificates, and update the Anticipated Financial Accounts of the project.
Participating in progress meetings, proposing, discussing and acquire approval on technical proposals.
Participate in project management review and risk management review.
Support the Technical Office Manager in preparing, reviewing and submitting interim payment certificates till acquiring approvals from the Engineer and the Employer.
Prepare cost estimates and cost breakdown for different activities.
Monitor changes, identify variation orders and report the same to the Technical office Manager and support in preparing and acquiring approval on the related cost breakdown.
Support the Technical office manager in selection process of subcontractors and suppliers for projects and prepare subcontractors’ payments based on the site progress.

Key Skills and Pre-requisites

Proven experience in BIM Modeling Engineering Project.
Excellent user of REVIT and AutoCAD.
Proficient in Microsoft Office suite and internet.
Good knowledge of Mechanical Design Software
Strong written and verbal communication skills, excellent business and technical writing.
Strong problem solving, negotiation and analytical skills.
Capable of reading drawings and schematics.
Experience in working with multiple discipline projects.
In-depth, current technical engineering knowledge.
Ability to work across cultural and organisational boundaries and deliver under pressure

Senior Technical Office Engineer

Summary

Participate in project tenders and perform technical and commercial analysis providing material quantities & take offs, and cost estimates to ensure optimum budgeting for the tender.
Provides technical and commercial support to construction teams working on a project and liaises with the Project Manager, Technical office Manager, Construction Manager, Engineering consultants, to ensure the work is proceeding as per approved cost estimates and completed within the planned budget.

Key Responsibilities

Responsibilities will include (but not be limited to) the following:

Study the project documents, drawings, specifications and bill of quantities and provide the quantity survey and cost analysis reports on an early stage of the project to assist the technical office manager to forecast budget requirements.
Prepare, update, and submit quantity survey reports, material take offs, and follow up approvals with the Engineering consultant.
Analyze and report materials on stock and manage material ordering to ensure a steady work flow in a timely proper manner in coordination with the procurement team.
Monitor and control the project budget, report on forecasted budget at completion, provide creative solutions to mitigate any risks.
Track changes & variation, estimate and analyze cost, update and adjust project budgets according to approved variation.
Prepare the interim payment certificates, update the Anticipated Financial Accounts of the project, analyze project outcomes, and create detailed financial reports.
Prepare cost estimates and cost breakdown for different activities.
Monitor changes, identify variation orders and report the same to the Technical office Manager and support in preparing and acquiring approval on the related cost breakdown.
Take part in the issue of the material submittals and workshop drawings.
Participate in issuing subcontractors packages and prepare subcontractor BOQs and related specifications in coordination with the procurement department.
Support the Technical office manager in preparation of subcontractors’ payments based on the approved quantity survey and site progress.
Coordinate and liaise with the document control team and ensure maintaining organized and detailed records and documents of all projects (i.e. working drawings, quantity surveying, purchase orders … etc) and coordinating with different teams to get these documents issued.
Participating in progress meetings, proposing, discussing and acquire approval on technical and commercial proposals.
Participate in project management review and risk management review.
Take part in the preparation of taking over certificate, project documents and As-built packages.
Communicating projects’ progress and problems/risks/concerns to Senior Management.
Communicate, Liaise, and coordinate with different departments and stakeholders inside and outside the organization to ensure a successful completion of the project.

Education and Experience

Bachelor’s degree in Civil / Architectural Engineering or other relevant.
5-7 years’ experience in the Construction and Engineering industry.
Extensive experience in construction/site management, project budgeting, Project evaluation and financial aspects of construction projects.
Strong track record of successfully completed projects of all types and sizes.
Chartered certificate from RICS is preferable.

Key Skills and Pre-requisites

Proficient in Microsoft Office suite.
Exceptional numeracy and financial management skills.
Excellent Knowledge of BIM Modeling.

Excellent knowledge of REVIT, AutoCAD and Quantity Survey- Shop Drawings.

Strong critical thinking skills, problem solving, negotiation and analytical skills.
Strong written and verbal communication skills, excellent business and technical writing.
Capable of reading drawings and schematics.
Experience in working with multiple discipline projects.
Ability to work across cultural and organisational boundaries and deliver under pressure.
Second language (English) is highly desirable.

Quantity Survey Engineer

Summary

Participate in project tenders and perform technical and commercial analysis providing material quantities & take offs, and cost estimates to ensure optimum budgeting for the tender.
Provides technical and commercial support to construction teams working on a project and liaises with the Project Manager, Technical office Manager, Construction Manager, Engineering consultants, to ensure the work is proceeding as per approved cost estimates and completed within the planned budget.

Key Responsibilities

Responsibilities will include (but not be limited to) the following:

Study the project documents, drawings, specifications and bill of quantities and provide the quantity survey and cost analysis reports on an early stage of the project to assist the technical office manager to forecast budget requirements.
Prepare, update, and submit quantity survey reports, material take offs, and follow up approvals with the Engineering consultant.
Analyze and report materials on stock and manage material ordering to ensure a steady work flow in a timely proper manner in coordination with the procurement team.
Monitor and control the project budget, report on forecasted budget at completion, provide creative solutions to mitigate any risks.
Track changes & variation, estimate and analyze cost, update and adjust project budgets according to approved variation.
Prepare the interim payment certificates, update the Anticipated Financial Accounts of the project, analyze project outcomes, and create detailed financial reports.
Prepare cost estimates and cost breakdown for different activities.
Monitor changes, identify variation orders and report the same to the Technical office Manager and support in preparing and acquiring approval on the related cost breakdown.
Take part in the issue of the material submittals and workshop drawings.
Participate in issuing subcontractors packages and prepare subcontractor BOQs and related specifications in coordination with the procurement department.
Support the Technical office manager in preparation of subcontractors’ payments based on the approved quantity survey and site progress.
Coordinate and liaise with the document control team and ensure maintaining organized and detailed records and documents of all projects (i.e. working drawings, quantity surveying, purchase orders … etc) and coordinating with different teams to get these documents issued.
Participating in progress meetings, proposing, discussing and acquire approval on technical and commercial proposals.
Participate in project management review and risk management review.
Take part in the preparation of taking over certificate, project documents and As-built packages.
Communicating projects’ progress and problems/risks/concerns to Senior Management.
Communicate, Liaise, and coordinate with different departments and stakeholders inside and outside the organization to ensure a successful completion of the project.

Education and Experience

Bachelor’s degree in Civil / Architectural Engineering or other relevant.
5-7 years’ experience in the Construction and Engineering industry.
Extensive experience in construction/site management, project budgeting, Project evaluation and financial aspects of construction projects.
Strong track record of successfully completed projects of all types and sizes.
Chartered certificate from RICS is preferable.

Key Skills and Pre-requisites

Proficient in Microsoft Office suite.
Exceptional numeracy and financial management skills.
Excellent Knowledge of BIM Modeling.

Excellent knowledge of REVIT, AutoCAD and Quantity Survey- Shop Drawings.

Strong critical thinking skills, problem solving, negotiation and analytical skills.
Strong written and verbal communication skills, excellent business and technical writing.
Capable of reading drawings and schematics.
Experience in working with multiple discipline projects.
Ability to work across cultural and organisational boundaries and deliver under pressure.
Second language (English) is highly desirable.

Senior Mechanical Technical Office Engineer

Summary

Participate in project tenders and perform technical and commercial studies pointing out the technical requirements of the project and the optimum cost breakdown for the items.
Provides technical support to construction teams working on a project and liaises with the Technical office Manager, Site Manager, Engineering consultants, to ensure that the work complies with all engineering standards, codes, specifications, and design instructions.

Key Responsibilities

Responsibilities will include (but not be limited to) the following:

Study the project documents, drawings, specifications and bill of quantities to coordinate the technical aspects of the project and support the Technical office manager in all technical and commercial issues to the benefit of the organization.
Preparing and follow up technical and material submittals till obtaining approvals from the Engineering consultant.
Prepare engineering calculations, designs and value engineering proposals and follow up with the Engineering consultant till obtaining approvals.
Prepare workshop drawings, technical proposals, and construction method statements with construction personnel and till obtaining approvals from the Engineering consultant.
Prepare and issue request for information and follow up the feedback of the Engineering consultants.
Prepare quantity survey reports and material takeoff and coordinate with the procurement team the delivery of relative items in a timely proper manner.
Support the Technical office manager to prepare the interim payment certificates, and update the Anticipated Financial Accounts of the project.
Participating in progress meetings, proposing, discussing and acquire approval on technical proposals.
Participate in project management review and risk management review.
Support the Technical Office Manager in preparing, reviewing and submitting interim payment certificates till acquiring approvals from the Engineer and the Employer.
Prepare cost estimates and cost breakdown for different activities.
Monitor changes, identify variation orders and report the same to the Technical office Manager and support in preparing and acquiring approval on the related cost breakdown.
Support the Technical office manager in selection process of subcontractors and suppliers for projects and prepare subcontractors’ payments based on the site progress.
Coordinate with the suppliers all technical data and information preparing subcontractor tender packages including drawings BOQs and related specifications and discuss technical proposals in coordination with the procurement department.
Support the Technical office manager in documenting project issues/conditions.
Coordinate and liaise with the document control team and ensure maintaining organized and detailed records and documents of all projects (i.e. working drawings, quantity surveying, purchase orders … etc) and coordinating with different teams to get these documents issued.
Taking part in checking the quality of the executed works.
Preparation of As-built packages for the project including all required documentations and acquiring approval from the Engineering consultant.
Implementing and solving technical problems that arise.
Communicating projects’ progress and problems/risks/concerns to Senior Management.
Communicate, Liaise, and coordinate with different departments and stakeholders inside and outside the organization to ensure a successful completion of the project.

Education and Experience

Bachelor’s degree in Mechanical engineering.
7 -10 years’ experience in the Construction and Engineering industry.
Extensive experience in operations, design, engineering, site works, construction/site management, project evaluation and technical office engineering.
Strong track record of successfully completed projects of all types and sizes.

Key Skills and Pre-requisites

Proven experience in BIM Modeling Engineering Project.
Excellent user of REVIT and AutoCAD.
Proficient in Microsoft Office suite and internet.
Good knowledge of Mechanical Design Software
Strong written and verbal communication skills, excellent business and technical writing.
Strong problem solving, negotiation and analytical skills.
Capable of reading drawings and schematics.
Experience in working with multiple discipline projects.
In-depth, current technical engineering knowledge.
Ability to work across cultural and organizational boundaries and deliver under pressure.
Second language (English) is highly desirable.